Troubleshooting - Philips BDP7300/05 User Manual

Blu-ray disc player
Hide thumbs Also See for BDP7300/05:
Table of Contents

Advertisement

8 Troubleshooting

Warning!
Risk of electric shock. Never remove the casing of
this player.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
player, check the following points before
requesting service. If the problem remains
unsolved, register your Blu-ray disc player and
get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of your Blu-ray disc
player. The model number and serial number
are on the back or bottom of this player. Write
the numbers here:
Model No._____________________________
Serial No.______________________________
38
EN
Main unit
No reaction to the remote control.
Connect this player to the power outlet.
Point the remote control at the iR sensor of
this player.
Insert the batteries correctly.
Insert new batteries in the remote control.
Picture
No picture
See TV manual for correct video input
channel selection. Change the TV channel
until you see the Philips screen.
No picture on HDMI connection.
If this player is connected to the unauthorised
display device with an HDMI cable, the
audio/video signal may not be output.
Check if the HDMI cable is faulty. Replace a
new HDMI cable.
If this happens when you change the
Video] setting, press HDMI on the remote
control repeatedly until picture appears.
No high-defi nition video signal on the TV.
Ensure that the disc contains high-defi nition
video.
Ensure that the TV supports high-defi nition
video.
[HDMI

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdp7300Bdp5000

Table of Contents