Easylink Setup - Philips BDP7300/05 User Manual

EasyLink Setup

1
Press .
2
Select [Settings], then press OK.
3
Select [EasyLink Setup], then press B.
Video Setup EasyLink
Audio Setup
One Touch Play
Preference Setup One Touch Standby
EasyLink Setup
Advanced Setup
4
Select an option, then press OK.
5
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press
Note
•
See the explanations of the above options in the
following pages.
[EasyLink]
Your Blu-ray disc player supports Philips
EasyLink, which uses the HDMI CEC
(Consumer Electronics Control) protocol.
EasyLink-compliant devices that are connected
through HDMI connectors can be controlled by
a single remote control.
[On]
• – Enables EasyLink features.
[Off]
• – Disables EasyLink features.
[One Touch Play]
When you press PLAY button on the remote
control, the TV (if support one-touch play) and
the Blu-ray disc player will be turned on. Disc
play starts if there is a disc in the Blu-ray disc
player and the TV automatically switches to the
correct channel to show the video content.
•
•
On
[One Touch Standby]
On
When you press and hold STANDBY button
on the remote control, this player and all the
connected HDMI CEC devices (if support
one-touch standby) switch to standby mode
simultaneously.
•
•
.
•
•
[On] – Enables one-touch play feature.
[Off] – Disables one-touch play feature.
[On]
– Enables one-touch standby feature.
[Off] – Only respond to the standby signal
from this player's remote control.
Note
You must turn on the HDMI CEC operations on
the TV/devices before you can enjoy the EasyLink
controls. See the TV/devices manual for details.
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
EN 33