Epson Stylus Photo RX600 How To Copy And Print page 15

12 Slide the strip of film into the film holder, with the duller
(emulsion) side up.
13 Reinstall the filmstrip cover over the strip of film (it should snap
into place). Press it around the edges to make sure it is closed.
14 Place the film holder on the document table, as shown.
Insert the positioning posts on the film holder into the two holes
near the scanner lid. The film should be in the center of the
document table so that it is under the lamp when the scanner lid
is closed.
15 Close the scanner lid.
13