Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of this player.
Before connecting the AC power cord, ensure you have
completed all other connections.
The type plate is located on the back of this player.
Connect the AC power cable to the wall
This player is ready to be set up for use.
4 Get started
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
Prepare the remote control
Press and push the battery compartment to
slide it open (see "1" in the illustration).
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Push and slide back the battery compartment
(see "3" in the illustration).
If you are not going to use the remote control for a long
time, remove the batteries.
Do not mix batteries (old and new or carbon and
Batteries contain chemical substances, so they should be
disposed of properly.
Find the TV input
to turn on this player.
Turn on the TV and switch to the video input
(refer to the TV user manual on how to select
the A/V input).