Additional Information; Update Software - Philips BDP2850/05 User Manual

Tip
•
Use this player's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
[Version Info.]
Display the software version and the MAC address
of this player.
Tip
•
This information is needed for you to check if a latest
software version is available at the Philips website so that
you can download and install on this player.
[Restore Default Settings]
Reset all the settings of this player to the factory
settings, except for [Parental Control] setting.

7 Additional Information

Update software

®
VOD
For software updates to enchance performance,
check the current software version of this player to
compare with the latest software (if available) at the
Philips website.
1
Press
2
Select [Setup], and press OK.
3
Select [Advanced] > [Version Info.], and press
OK.
Update software via network
1
Set up the internet connection (see "Get
started' > "Set up a network").
2
In the Home menu, select [Setup] >
[Advanced] > [Software Update] > [Network].
»
3
Follow the instructions on the TV screen to
confirm update operation.
»
Update software via USB
1
Go to www.philips.com/support to check if
the latest software version is available for this
player.
2
Download the software into a USB flash drive:
a Un-zip the download, and make sure that
b Put the "UPG" folder in the root
3
Insert the USB flash drive to the
jack on this player.
4
In the Home menu, select [Setup] >
[Advanced] > [Software Update] > [USB].
5
Follow the instructions on the TV screen to
confirm update operation.
»
•
Do not turn off the power or remove the USB flash
drive when software updating is in progress to prevent
possible damage of this player.
.
You are prompted to start upgrading
process if upgrade media is detected.
Once software update is complete, this
player automatically turns off to standby.
the un-zipped folder is named "UPG".
directory.
Once software update is complete, this
player automatically turns off to standby.,
then turns on again.
Note
(USB)
EN 21