Recording A Single Track - Philips CDR700BK User Manual

Dual deck audio cd recorder
Hide thumbs Also See for CDR700BK:
Table of Contents

Advertisement

How to record from the internal deck

Recording a single track

These recording modes are ideal for recording tracks from
several CD's. If you are making a compilation CD you can
do it either at high speed (RECORD FAST) or while
listening to the tracks (RECORD LISTEN). Finalization is
not executed automatically.
Preparing
1
Place an unfinalized CDR(W), absolutely free of scratches
and dust particles in the left CDR tray.
Place the disc from which you want to record in the right
CD tray.
2
With the CD recorder stopped, press TYPE one time to
select RECORD FAST or two times to select RECORD
LISTEN.
The display first shows RECORD FAST or RECORD
LISTEN.
The
label starts blinking. After 3 seconds
RECORD
the display shows the remaining CDR(W) recording
time on the left and total time of source on the right.
(every 2 seconds PRESS RECORD is displayed.)
3
Program the track(s) for recording.
Press PROG to select one or more tracks for recording
(see programming):
-
rotate the EASY JOG/ENTER button to the required track
number, then press the button (or ENTER on the remote
control)
or
-
directly select the track number via the 10-keypad on the
remote control, then press the ENTER button to confirm
your selection and go to the next step.
4
Press STOP 9 or PROG to end programming.
lights continuously.
PROG
Recording
5
Press RECORD to start recording the program.
WAIT lights up.The display shows the total remaining
time for the selected recording. High speed recording
starts.
lights continuously.
RECORD
20
EASY JOG
STORE/ME NU CANCEL/D ELETE
PLAY/PAU SE
STOP
OPEN/CLO SE
ENTER
AUDIO CD PLAYBA CK
PROG
SHUFFLE
DISPLAY
SCROLL
REPEAT
DJ MODE
For recording from the internal deck (RECORD FAST, REC
0
LISTEN or MAKE CD) we advise you to leave the
recording level at its factory setting (0 dB).
Note: It is possible to equalise the recording level of tracks
recorded from different CD's. See the next paragraph.
To check the track number and track time, press DISPLAY.
0
This can be done during recording.
Recording will stop automatically.
0
Note: Copy prohibited tracks will be copied analog. ANALOG
REC is displayed.
AUDIO CD PLAYBA CK
6
To stop recording manually, press STOP 9.
UPDATE lights up,
recording stops. (Minimal track length must be 4 seconds
otherwise silence will be added to the track.)
7
Press STOP 9 one more time to remove the program of
tracks, if any.
8
Insert a new disc from which you want to record and
1
resume at step
.
If STOP 9 was pressed within 3 seconds after RECORD, no
0
recording will take place.
After recording, the display shows UPDATE for several
0
seconds.The Total time indications can differ slightly.
However, no music information is lost.
Note: In this Recording mode, the Pause function is not
operative.
Finalizing
If you want to play the recorded CD(RW) on a normal
CD player, you must first finalize the disc. Please note that
you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs.When all tracks are
recorded you can finalize the CDR(W) disc:
9
With the recorder stopped press FINALIZE.
The display shows FINALIZE CD and PRESS
RECORD.
10
Press RECORD.
XX XX FINAL and the approximate finalization time
appear on the display.
The display counts down through the finalization. On
0
completion, the total number of tracks and the total time
recorded appears on the display.
For CDR(W),
changes to
0
RW
Notes:
Finalizing will take at least 2 - 4 minutes.
During finalization, the CD recorder accepts no operating
commands.
When a CDR is finalized no more recordings can be added.
goes out and
RECORD
on display.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdr-700Cdr-778Cdr700/00

Table of Contents