Infinity
AirFlo
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
SAFETY SUMMARY
The following recommendations are made for the safe
and proper installation and use of the Infinity AirFlo:
GENERAL WARNINGS
DO NOT install this equipment without first read-
ing and understanding this instruction sheet. If you
are unable to understand the Warnings, Cautions
and Instructions, contact a qualified technician
before attempting to install this equipment - oth-
erwise, injury or damage may occur.
Care should be taken to prevent the hook and
loop fasteners from becoming wet. Prolonged
contact with moisture may reduce the hold of
the hook and loop fasteners.
INSTALLATION WARNINGS
After ANY adjustments, repair or service and BE-
FORE use, make sure that all attaching hardware
is tightened securely.
USER WARNINGS
Skin condition should be checked very frequently
after the installation of any new seat.
Care should be taken to ensure that the Infinity
AirFlo is properly inflated. Over-inflation will not
allow the body to sink deeply enough into the
cushion and proper body weight distribution will
not be achieved. Under-inflation may result in the
user "bottoming out" onto the cushion base.
The Infinity AirFlo should be checked daily to de-
termine whether the inflation level is correct.
IMPORTANT INFORMATION
INTRODUCTION
Infinity AirFlo
AirFlo Insert
Outer/Inner Covers
ATTACHING/REMOVING SEAT TO/
FROM SEATING SURFACE (FIGURE 1)
1