Advertisement
Setting the clock
1
In standby mode, press and hold
2
When the hour digits flash, turn
remote to set the hours.
3
Press
again and the minute digits flash. Then turn
CLOCK/RDS
system or press
VOL +/-
4
Press
again to confirm the time setting.
CLOCK/RDS
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and "1" to exit
progressive scan.
CLOSED CAPTIONS
Tip
See chapters "Preparations" and "DVD Menu Options" in the User Manual for detailed descriptions.
Playing a disc
1
Press
OPEN •CLOSEç (ç
then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
2
Playback will start automatically. If not pressÉÅ.
3
To stop playback, press
PRESET-/9 (9
on the remote.
CLOCK/RDS
on the system or press
VOLUME-/+
on the remote to set the minutes.
on the remote) to open the disc tray and load in a disc,
on the remote).
on the
VOL +/-
on the
VOLUME-/+
OPEN•CLOSE
Advertisement
