Table of Contents
Advertisement
Rechargeable Li-ion Battery (Optional) (Continued)
A liquid (electrolyte) leaking from the P-touch labeling system or rechargeable battery may
indicate that the rechargeable battery is damaged. If there is any evidence of leakage from the
rechargeable battery, immediately stop using the P-touch labeling system, unplug the AC
adapter, and isolate the P-touch labeling system by placing it in a bag. Use rubber gloves or
other suitable covering to prevent contact with electrolyte.
DO NOT touch the electrolyte. If the electrolyte gets in the eyes, do not rub them. Immediately
rinse the eyes liberally with tap water or other clean water and seek the advice of a medical
professional. If left unattended, the electrolyte could cause eye damage. If the electrolyte comes
into contact with your skin or clothing, immediately rinse them with water.
DO NOT put the rechargeable battery, or a P-touch labeling system with the rechargeable
battery installed, into a microwave oven or high-pressure container.
DO NOT disassemble, modify, or attempt to repair the rechargeable battery.
DO NOT dispose of the rechargeable battery in fire or intentionally overheat. This could cause
the internal insulation to melt, gas to be emitted, or safety mechanisms to fail. Additionally, the
electrolyte solution could catch fire.
DO NOT puncture the rechargeable battery with any objects, subject it to severe shocks, or
throw it. Damage to the rechargeable battery's protection circuit could cause the rechargeable
battery to charge or discharge at an abnormal current/voltage or cause an abnormal chemical
reaction within the rechargeable battery.
DO NOT leave a drained rechargeable battery in the P-touch labeling system for a long period
of time. This could shorten the life of the rechargeable battery or lead to an electrical short.
DO NOT incinerate the rechargeable battery or dispose of it with household waste.
If the P-touch labeling system can only be used for a short period of time, even though the
rechargeable battery is fully charged, the rechargeable battery may have reached the end of its
service life. Replace the rechargeable battery with a new one. Use only the rechargeable battery
specifically designed for your P-touch labeling system as a replacement. When removing and
replacing the rechargeable battery, cover the terminals of the old rechargeable battery with tape to
avoid creating a short in the battery, and ensure correct polarity (+) (-) of the new rechargeable
battery before inserting it into the P-touch labeling system.
4
DANGER
Advertisement
Table of Contents
