Setup - Casio YA-P10 User Manual

Setup

Charging the Pointer
Use the supplied USB cable (Type A to
Type Mini B) to connect the pointer to
your computer as shown nearby.
The battery indicator is lit (red) while
charging is in progress and goes out after
charging is complete.
Charging takes about 2.5 hours.
*
Warning
*
Caution
If charging is not complete within the prescribed amount of time, disconnect
the cable from the pointer and stop charging. Failure to do so creates the risk
of battery overheating, fire, and explosion.
Fluid leaking from a battery that gets onto your skin or clothing can cause skin
irritation. If this happens, immediately rinse the area with clean water.
A to Mini B
E-11