JEGFSISwChKTrRPo Interactive Pointer YA-P10 Interactive Pointer YA-P10 取扱説明書 日本語 本書は、 お読みになった後も大切に保管してください。 User’s Guide English Be sure to keep all user documentation handy for future reference. Bedienungsanleitung Deutsch Bitte bewahren Sie die gesamte Benutzerdokumentation für späteres Nachschlagen auf. Mode d’emploi Français Conservez la documentation à...
Safety Precautions About safety symbols Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below. This symbol indicates information that, if ignored or applied incorrectly, could Warning possibly create the risk of death or serious personal injury.
Warning Avoid water and other liquids. Never allow the pointer to become wet. Water and other liquids create the risk of fire and electric shock. Do not disassemble or modify the pointer in any way. Never try to take the pointer apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, personal injury, or operational malfunction.
Immediately stop using the pointer whenever any one of the following conditions exists. Failure to do so creates the risk of fire, electric shock, or overheating of batteries, and explosion. • When the pointer is damaged due to dropping • When the pointer is emitting smoke or strange odor, when the pointer does not operate normally even when used as instructed by the user's guide, or any other time malfunction of the pointer is suspected In any of the above cases request servicing and repair from your original retailer or the contact specified...
Caution Be sure to follow all applicable local laws and regulations when disposing of the pointer.
Operating Precautions Never use or store the pointer in the following locations. Doing so creates the risk of malfunction of and damage to the pointer. • Locations prone to electrostatic charge • Locations subjected to temperature extremes • Locations where there is extreme moisture •...
Using the CD-ROM The CD-ROM that comes with the pointer contains a Presentation Draw application that provides various projector presentation tools, and a PDF file version of its User’s Guide. ® ® Your computer will need to have Adobe Reader installed in order for you to view the PDF User’s Guide.
Setup Charging the Pointer Use the supplied USB cable (Type A to Type Mini B) to connect the pointer to your computer as shown nearby. The battery indicator is lit (red) while charging is in progress and goes out after charging is complete.
Important! Important! Important! Connecting the pointer to a computer for charging, make sure that the computer is connected to an AC power source to ensure a stable power supply. If your computer does not supply power via its USB port when turned off, leave your computer turned on while charging the pointer.
Connecting a Computer to the Projector In order to use the pointer as a computer pointing device, there must be a USB connection between the computer and the projector. To project the computer screen contents with the projector, you also need to connect the analog RGB output terminal of the computer to the projector’s COMPUTER IN terminal.
Important! Important! Important! After connection is complete, be sure to change the projector’s “Option Settings 2 Interactive Pointer” setting to “On”. For more information, see the User’s Guide on the CD-ROM that comes with the projector. Be sure to make the RGB output of the computer connected to the projector the primary monitor.
Using the Pointer Holding the Pointer Hold the pointer securely as shown in the illustrations below. E-15...
To start a pointer operation Press the pointer left mouse button or right mouse button. • This turns on the pointer and causes the link indicator to start flashing. Holding the pointer securely, point the pointer tip at the projected image. •...
Pointer Operations The following pointer operations are supported on the projected image of a computer’s RGB output. Left-click : Use the pointer tip to point at the location where you want to click (it is not necessary to touch the screen with the pointer tip), and then press the left mouse button.
Indicators The following shows the pointer status as indicated by the indicators. Indicator Pointer Status Turned off Searching for projector Linked with projector and standing by for interactive pointer operation. Or in use as interactive pointer. Powering down* Battery is charging or battery power is low (approximately 20% of full charge).
Troubleshooting Check the following items whenever you experience any problem while using the pointer. Problem Possible cause and recommended action Pointer does not If the pointer’s battery indicator is flashing or light, it means that the function at all or only pointer battery level is low.
Problem Possible cause and recommended action Pointer does not The projector may be in the 3D input mode. Switch the projector to the function at all or only normal input mode. For more information, see the User’s Guide on the functions intermittently.
Handling rechargeable batteries (Please recycle!) Be sure to recycle no longer needed batteries to help conserve precious resources. Contact your original dealer or authorized CASIO service center for information about recycling. Precautions when handling old rechargeable batteries Insulate the connectors with tape, etc.
Do not dispose of the battery. Be sure to take it in for recycling. • Contact your original dealer or authorized CASIO service center for information about recycling. Screws After removing the lithium-ion battery, be sure to dispose of the pointer in accordance with the laws, rules, and regulations in your geographic area.
Specifications Operating Frequency 2.4GHz ISM band Lithium-ion battery Power Requirements Normal voltage/capacitance: 3.7V DC, 800mAh Battery Operation Time Approximately 30 to 35 hours (on a full charge) Operating temperature: 5 to 35°C (41 to 95°F) Environment Operating humidity: 20 to 80% (non-condensation) Rated Power 5V DC Approximately 2W Dimensions...
The U.S.A. and Canada GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Model Number: YA-P10 Trade Name: CASIO Responsible party: Casio America, Inc. Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA Telephone number: 973-361-5400 This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United Kingdom EFTA: Switzerland, Iceland, Liechtenstein, Norway Member states with restrictive use France, Belgium Manufacturer CASIO COMPUTER CO., LTD. Brand CASIO Type YA-P10...
DECLARATION OF CONFORMITY We, the under signed, CASIO Europe GmbH, hereby declare that the following equipments: Product: Wireless Pen Mouse Model: YA-P10 Brand: CASIO are in conformity with all the provisions of the following EC directive with meeting the related test standards: Council Directive: 1999/5/EC (R&TTE Directive):...
Batterij niet weggooien, maar inlevern als KCA Manufacturer: CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: CASIO EUROPE GmbH Casio-Platz 1, 22848 Norderstedt, Germany...
Printed in China Imprimé en Chine MA1105-B P9K39-4800-00...