How To Use Low Frequency Pad - Nuga N4 User Manual

How to Use Controller

- How to Use Low Frequency Pad

Connection
Towel for the low frequency pad
Surface to contact the abdomen
Various wearing methods
You may wear it around any area other than the abdomen.
Low frequency pads can be used for the users with waist size of 26-42 inches.
(With the extension band, it can be used up to the waist size of 47 inches.
Please inquire if it is used for more than 47 inches.)
N4
What is the low frequency pad?
The low frequency pad is a device
to improve pain or amyotrophia
percutaneously by applying weak
current to the human body.
If there is no gel at home, place the
wet low frequency pad towel or
a piece of 100% cotton towel or
cloth on abdomen and wear the
low frequency pad.
· When you wet a towel or a cloth with
water, please squeeze out completely
from flowing water.
Wear the abdominal band after
fixing the low frequency pad
accurately.
Power supply
③ Press the low frequency button to
turn on the power supply for the
low frequency pad. (Initial setting
is set to 'Weak 1'.)
· Check out the connecting conditions
of the low frequency pad.
· Press the low frequency button
once: On
Press it once again: Off
Intensity control
Control the intensity of low
frequency with the intensity button.
(Refer to the following.)
Weak 1: Weak 2:
Green lighting Green blinking
Middle 1: Middle 2:
Yellow lighting Yellow blinking
Strong 1: Strong 2:
Red lighting Red blinking
The low frequency pad automatically stops after operations for
about 40 minutes.
How to Use Product