Test Operations After Installation; How To Use Product - Nuga N4 User Manual

Test Operations after Installation

Off On
Power switch
in the main assembly
Controller for Controller for
main assembly external projector
Do not sit or step on the synthetic leather
at the middle between the main and
auxiliary devices.
Avoid sitting or placing an object on the
part of cervical vertebrae projector or
auxiliary heating part.
Otherwise, it might cause damage to the
product.
N4
Checking out the power
supply for the product
Turn on the power switch.
Caution
Ensure the power supply to be turned off
after use or during no use.
Otherwise, it might cause failure.
Checking out operations
of controller
① Press the power button on the controller
② Adjust temperature for the internal projector
(+ / – button)
③ Adjust temperature for the external projector
(+ / – button)
④ Sub mat power indication
Refer to 'How to Use the controller' for each
mode (Page 28)
Checking out operations
of sub mat
After turning on the power of the main assembly,
turn the dial clockwise to set a desired
temperature in the sub mat.
Using the product
Lay yourself down with your legs toward the
sub mat and press the Auto button in the
controller for the automatic operations in the
product.
N4

How to Use Product

How to Use Controller
How to Use Product by Mode
How to Use External Projector(Abdomen heating pad)
How to Use Low Frequency Pad
How to Use Product
How to Set Temperature for Auxiliary heating part
28
28
33
34
36
38