How To Use Controller; How To Use Product By Mode - Nuga N4 User Manual

How to Use Controller

- How to Use Product by Mode

Auto Mode
Round-trip
acupuncture function
N4
Power supply
Press the power button.
· Check out the connecting conditions
of the controller.
· Press the power button once : On
Press it once again : Off
Auto Mode
Press the automatic button
(Auto LED lights up) to operate the
cervical vertebrae / internal projector.
There is no need to manipulate
the buttons during the operation
once it has started.
It will stop automatically after the
38-min massage.
Temperature control
Control temperature with +/- button.
(Moderate temperature: 55~60 )
· Range of temperature setting for
internal projector: 40~70
(Temperature of cervical vertebrae
· Temperature setting unit
40~70 : Temperature setting per 1
Auto Mode
Round-trip
massage function
Temperature control
Power supply
Press the power button.
· Check out the connecting conditions
of the controller.
· Press the power button once : On
Press it once again : Off
Auto Mode
Press the automatic button twice
(flashing of the automatic mode LED)
to operate cervical vertebrae /
internal projector. There is no need
to manipulate the buttons during the
operation once it has started.
It will stop automatically after the 38-min
massage.
Press the AUTO button to operate
AUTO 2 Mode during AUTO 1 Mode
is operating.
Control temperature with +/- button.
(Moderate temperature: 55~60 )
· Range of temperature setting for
internal projector: 40~70
(Temperature of cervical vertebrae
· Temperature setting unit
40~70 : Temperature setting per 1
How to Use Product