The Remote Control - Philips DVDR70/051 Operating Instructions Manual

MONITOR
tuner) in the DVD recorder (TV picture on the TV set) and playback on
the DVD recorder.
STANDBY m
interrupt a programmed recording (TIMER)
TV/DVD
to the TV set. This lets you watch the picture from any unit connected
to this scart socket (set-top box', video recorder or satellite receiver)
and at the same time record from another source.
If you have not connected a device to the EXT 2 AUX-I/O socket, use
this button to switch between TV reception and the DVD recorder.
But this only works if you use a scart cable to connect the TV set to
your DVD recorder ( EXT 1 TO TV-I/O socket) and your TV set
responds to this switch-over.
T/C
menu bar
If '
an introductory film will be shown. In this case, this function is not
available.
PLAY MODE
REC MODE
0..9
DISC-MENU
SYSTEM-MENU
the screen)
SELECT
OK
D C
CH+ A
CH- B
TIMER
Video Plus+
FSS &
chapter markers
RETURN
with some DVDs.
CLEAR
PLAY G
: This button lets you switch between the TV receiver (internal
: To switch set on or off, interrupt menu function,
: Switches the scart socket EXT 2 AUX-I/O directly
: Choose the ' '(Title)/' '(Chapter) directly from the
' appears in the display, the index menu from a recorded disc or
: Choose between repeat, shuffle play and intro-scan
: To select the maximum possible record time
: 0 - 9
: To show the DVD menu or the index screen
: Call up/cancel the main menu (menu bar at the top of
: Select function/value
: To store or confirm entry
: Cursor left, right
: Cursor up/ Next programme number
: Cursor down / Previous programme number
: To make a TIMER programming with Video Plus+
® or to alter or clear a programmed TIMER
: For displaying the edit menu for DVD+R(W) discs, for setting
: Return to previous menu on a video CD (VCD). This also works
: To delete last entry or clear programmed recording (TIMER)
: To play a recorded disc.
® /without