If you are connecting a satellite receiver, please read the section on 'Using a
satellite receiver'.
If you are connecting a decoder, you must install it as described in the next
section.
a
b If the sound is distorted on any of the stored TV channels or if there is no
sound at all, the wrong TV system may have been stored for the TV
channel. Read 'Manual TV channel search' for information on how to
change the TV system.
TV channels from a satellite receiver (connected to scart socket EXT 2 AUX-I/O ) are received
on the DVD recorder on programme number '
If necessary, use the MONITOR button to switch to the internal tuner.
Select programme number '
' with CH- B .
number '
You should select the TV channels to be received by the satellite receiver directly on the
receiver itself.
Some TV channels send coded TV signals that can only be viewed properly with a purchased or
rented decoder. You can connect such a decoder (descrambler) to your DVD recorder. The
following function automatically activates the connected decoder for the TV channel you want to
watch.
If your TV set supports 'Easy Link' the decoder must be assigned to the
relevant TV channel on the TV set (see the operating instructions for your TV
set). Settings cannot then be made in this menu.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON m .
'
' with 0 on the remote control and then select programme
Installing your DVD recorder