Special Features - Philips DVDR7300H/05 User Manual

Product Information

Special features

Philips provides the best possible connection
between your recorder and other home
cinema equipment. The recorder is controlled
by external devices (for example, receivers
and TVs) via Cinema Link and is automatically
set to the right system settings.
With this function you can align the sequence
of the channels on your TV with those on
your recorder. Make sure you have
connected the TV to the EXT1 TO TV-I/O
socket of this recorder.
This function enables you to record a
programme from your Satellite Receiver or
any other devices. Make sure that the device is
connected to the EXT2- AUX I/O socket of
this recorder, and the timer setting has been
done on the connected device.
Direct Record
This function allows you to instantly record the
programme you see on the TV without tuning
this recorder to the same programme.
Time Shift Buffer
As soon as you turn on this recorder, the
programme showing on the TV will be stored
into the 'Time Shift Buffer'. It acts as a
temporary HDD storage of your recordings.
The contents will be automatically deleted after
6 (six) hours or when you turn off this
recorder. To store the contents on the hard
disk permanently, you have to mark the section
in the 'Time Shift Buffer' for recording to
prevent them from being deleted.
10
dvdr7300h_eu_eng2.indd 10
(continued)
FlexTime
You can watch or recall a TV programme while
it is still being recorded. You do not have to
wait until the end of the recording before
starting playback. You can also watch a
different programme from the hard disk while
it is recording something else.
Instant Replay
You can repeat a scene of a live TV
programme by pressing JUMP BACK button
on the remote control, as often as you like. If
you wish to return to the live TV programme,
just press TUNER.
Pause Live TV
A live TV programme is now under your
control. You can pause the programme by
pressing PAUSE button and resume playback
at the scene it was interrupted by pressing
PLAY button. If you want to return to the live
TV programme, just press TUNER.
i.LINK, is also known as 'FireWire' and 'IEEE
1394'. This connection is used for the transfer
of high bandwidth digital signals as used by
digital video (DV) devices. It carries all audio
and video signals via a single cable.
This is a simple programming system for
recorders. To use it, enter the programming
number associated with your television
programme. You can find this number in your
favourite listings magazine.
The GUIDE Plus+ system lists your TV channel
programming information. You can use it to
schedule recordings, glance at upcoming
programme content, or change channels at
your external receiver/cable box using this
recorder's remote control.
2005-10-04 4:13:45 PM