Setting A Timer Recording From An External Cable Box/Satellite Receiver - Philips DVDR3305/02 User Manual

{ Source }
– Use keys to select the recording
input source.
{ Rec Mode }
– Use keys to select your option.
See pages 27~29 on "Recording settings -
Default Recording mode".
{ Mode }
– Use keys to select { Once },
{ Daily }, { Weekly }, { Mon-Fri }
(Monday to Friday, ) { Mon-Sat }
(Monday to Saturday) or { Weekend }
(Saturday and Sunday) recordings.
{ Date }
– Use keys or the numeric
keypad 0-9 to enter the date for
recording.
{ Start }
– Use keys or the numeric
keypad 0-9 to enter the start time of
recording.
{ End }
– Use keys or the numeric
keypad 0-9 to enter the end time of
recording.
{ VPS }
– Use keys to turn on/off the VPS
mode (see page 30 on "About
VPS/PDC").
F
Select in the menu and press
OK
OK.
The system will store the timer entry
and return to the timer schedule list.
To cancel the above timer setting, select
in the menu and press OK.
CANCEL
G
Press TIMER to exit the menu.
H
Insert a DVD±R/±RW into the DVD
recorder.
TIPS: Ensure that there is suffi cient space available on the DVD±R/±RW before recording.
You have to fi nalise the DVD±R before it can be played on other players, see page 36.
1_dvdr3305_EU_Eng10.indd 31 1_dvdr3305_EU_Eng10.indd 31
Recording
I
Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording starts.
If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The ' ' icon will light up on the
TIMER
display panel if a timer recording is set.
Helpful Hint:
– Set the timer recording one minute ahead
of the programme's start time. This helps
ensure the entire programme is recorded as
the disc requires about 30 seconds to
prepare for recording.
Setting a timer recording from
an external Cable Box/Satellite
Receiver
If you have a Satellite Receiver/Cable Box
connected to this DVD recorder via the
EXT2 AUX-I/O scart connection (see
page 15), follow the steps described
below to programme the recordings.
A
Select the channel you want to record at
the Satellite Receiver/Cable Box.
B
Programme the recording with the
required information. Follow the steps
A ~ I of "Timer Recording (manually)"
on pages 30~31.
{ Source }
– Use keys to select { EXT2 } as the
input channel and press OK to confi rm.
C
Leave the Satellite Receiver/Cable Box on
for the recording.
Helpful Hint:
– The Cable Box/ Satellite has to be turned
on before timer recording starts. Recording
will proceed but as there is no signal, the
recording will be blank.
(continued)
31
2005-10-31 2:53:35 PM 2005-10-31 2:53:35 PM