Modifying Channel Information - Philips DVDR3305/02 User Manual

Getting Started

Modifying Channel Information

You can set a TV channel to your
preference and improve the reception
and the sound quality of the TV channel.
A
Press SYSTEM-MENU.
The system menu appears.
B
Use keys to highlight
Menu - Channel Setup } and press
C
Use keys to highlight { Modify
Channel Information } and press OK.
The channel menu appears.
Channel
Name
Scan mode
Frequency
TV System
NICAM
Audio
Decoder
Skip
Fine-tune
OK
D
Use keys to select one of the
options and press OK.
{ Name }
You can use the numeric keypad 0-9
to select the channel preset number
which you wish to change.
– Use keys to change alphabet/
number and use
different entry fi elds, then press OK to
confi rm.
{ Scan Mode }
Select TV channel search mode based on
channel allocation or frequency.
– Use keys to select { Channel },
{ S-Channel } (Special Channel) or
{ Frequency }, then press OK to confi rm.
{ Frequency }
Shows the frequency of the current TV
channel.
– If required, use
automatic frequency search and press
OK to confi rm.
TIPS: Press to go back to previous menu item.
Press SYSTEM-MENU to exit the menu.
24
1_dvdr3305_EU_Eng10.indd 24 1_dvdr3305_EU_Eng10.indd 24
(continued)
{ System
.
P001/Ch003
Frequency
55.26MHz
PAL B/G
On
DUAL A
Off
No
Cancel
OK
keys to select
keys to start the
{ TV System }
Set the TV system that produces the
least distortion of picture and sound.
– Use keys to select a suitable sound
mode, then press OK to confi rm.
(See chapter "TV System Guide" at the
back of this manual for more information).
{ NICAM }
Turn on or off the digital sound
transmission system which improves the
sound quality of the TV channel.
– Use keys to select { On } or
{ Off }, then press OK to confi rm.
{ Audio }
For bilingual TV programmes, you can
switch between stereo (original) and
additional audio language.
– Use keys to select { Dual A } or
{ Dual B }, then press OK to confi rm.
{ Decoder }
If you have connected the DVD recorder
to an external decoder, select { On } and
press OK to confi rm.
{ Skip }
Select this to set the channel to be
skipped.
The skipped channels can only be
accessed by pressing the corresponding
number button on the remote control.
– Use keys to choose { Yes } if you
wish to skip this channel, then press OK
to confi rm.
{ Fine Tune }
Select this to fi ne-tune the TV channel
manually if the reception is poor.
– Use keys to adjust the frequency.
E
Once complete, select
menu and press OK to confi rm and exit
to the previous menu page.
If you do not wish to save any
changes, select
CANCEL
in the
OK
and press OK.
2005-10-31 2:53:34 PM 2005-10-31 2:53:34 PM