Video Output Settings - Philips DVDR7250H/05 User Manual

System Menu Options

Video Output settings

TV Shape
Black Level
Horizontal
Video Output
Progressive
84
(continued)
(underlined options are the factory default settings)
The picture shape can be adjusted to fi t your TV.
{ 4:3 Letterbox } – For a 'wide-screen' display with
black bars on the top and bottom.
{ 4:3 PanScan } – For a full-height picture with the
sides trimmed.
{ 16:9 } – For wide-screen TV
(frame ratio 16:9).
Adapts the colour dynamic for NTSC disc.
{ Normal } – Normal colour contrast.
{ Enhanced } – Improves the colour contrast and brightens the
picture of an NTSC-compatible DVD.
Use keys to adjust the horizontal position of the picture on your TV
screen, press OK to confi rm the setting.
Chooses the type of video output that matches the video connection
between this recorder and your TV.
{ RGB•CVBS } – For RGB or CVBS connection.
{ S-Video } – For S-Video connection.
Before enabling the progressive scan feature, you must ensure that your
TV can accept progressive signals (a progressive scan TV is required) and
you have connected the recorder to your TV using the Y Pb Pr (see page
18).
{ On } – Turns on progressive scan mode.
{ Off } – Disables the progressive scan mode.
Note: If no picture appears, wait for 15 seconds for auto recovery.
Otherwise, turn off the progressive scan as below:
1) Disconnect the recorder's ~MAINS from the power supply.
2) Hold down . on the recorder whilst reconnecting its ~MAINS to
the power supply.