Step 3: Installation And Set-Up - Philips DVDR7250H/05 User Manual

Step 3: Installation and Set-up

E
The Channel Search menu appears on the
TV. Select { Search channels } in the
menu and press OK on the remote
control to start analogue channel search.
It takes a few minutes to complete.
CHANNEL SEARCH
This will search and install all Analogue and
Digital channels and services.
Search channels
Skip search
Disc tray will not open until setup is completed
Note:
Make sure you have successfully made
all the required connections to this recorder,
the TV and Satellite Receiver/Cable Box (if
any) and turned them on. The channel search
will detect the signals and save all the available
programme channels.
If no channels are found :
– Try the auto TV channel installation
after completing the basic setup, see page
81.
F
The recorder continues with the digital
channel search (TV and radio).
CHANNEL SEARCH
Digital channel search.
This may take a few minutes. Please wait
Search channels
Skip search
Disc tray will not open until setup is completed
G
After the channel search is fi nished, the
number of found and stored channels
(analogue TV, digital TV and digital radio)
appear, press OK to continue.
CHANNEL SEARCH
Analogue TV channels found : XX
Digital TV channels found : XX
Digital Radio channels found : XX
Check signal
Restart Search
Continue
TIPS: After completing the basic installation, you can change or update your settings using the system
setup menu, see page 78~86.
Start
OK
15
OK
H
The time and date menu appears.
TIME AND DATE
Please check the Time (hh:mm) and Date and correct
if necessary.
Time
Date
Done
Disc tray will not open until setup is completed
i. If the information is correct, select
{ Done } in the menu and press OK.
ii. If changes are required, use the
alphanumeric keypad 0-9 to enter
the correct time and date in the
respective fi eld.
I
The basic installation is now completed.
Easy setup completed. Continue with the GUIDE Plus+
installation?
Continue
Donot install now
Disc tray will not open until setup is completed
i. Select { Continue } in the menu and
press OK to start the GUIDE Plus+
installation. See next page for the
complete detailed setup.
ii. Select { Do not install now } in the
menu to skip the GUIDE Plus+
installation. The next time when you
want to install the GUIDE Plus+
system, press GUIDE on the remote
control, see next page.
J
Wait until the recorder has fi nished
initialising the system, then press OK to
exit.
You may now enjoy using this
recorder.
Helpful Hint:
– The TV programme listings do not appear
on the GUIDE Plus+ system as soon as you
complete the basic installation. It may take
up to 24 hours to receive TV listings data.
(continued)
20:01
31-01-2006
OK
OK
OK
27