Philips DVDR7250H/05 User Manual page 83

Digital Channel settings
Digital Ch.
Setup
Video fav.
Radio fav.
Sort video
Sort radio
Digital Ch.
Setup
Digital install
Update install
Full install
Check signal
Video Fav./Radio Fav.
Sort video/Sort radio
Updt Install
Full Install
Check Signal
CHECK DIGITAL SIGNAL QUALITY
Check the antenna connections and position.
Position the antenna to reach best signal quality.
Frequency 222.22
Go back
Low High
Signal strength
Signal quality Low High
System Menu Options
Although this recorder selects all the available digital TV channels during
basic installation, you may want to repeat the process later if more
channels become available in your area or if you are reinstalling the
recorder. It also allows you to adapt the digital TV and radio channels to
your personal preference.
A
Press SYSTEM on the remote control. Select { Setup } in the menu
and press repeatedly to select { Digital Ch. }.
B
Press repeatedly to select the following settings in the menu and
press to enter its options.
Press OK to mark your favourite digital TV/radio channels for quick
access by using the channel up/down button on the remote control.
– The TV/radio channels can be accessed by using the
CHANNEL
– The TV/radio channels can only be accessed by
pressing the corresponding number button on the
remote control.
According to your preference, you can change the order of the stored TV/
radio channels.
001 ARD 004
002 TELET
005
003 ORF2 --- ORF2 006
004 TELET
007
1) Use keys to select the TV/radio channel that you want to move
and press OK to confi rm.
2) Use keys to shift the TV/radio channel to the desired position
and press OK to swap the TV/radio channel with the TV/radio
channel at the current position.
Note: During sorting, the alphanumeric keypad 0-9 on the remote
control can be used to select a preset number.
This adds only the new channels to your existing preset list, after the last
free preset position. New channels refer to the channels that are
currently not installed. Press OK to start new channels search and install.
Press OK to start digital channels search and install. It will replace all
previously stored digital TV/radio channels.
Press OK to display signal strength and quality information of the digital
tuner. It will help to fi nd the best position of antenna.
Use keys to change the frequency or channel number and press
OK to check the signal quality. Position the antenna at the area where
the maximum signal quality is reached.
+ −
on the remote control.
TELET 004 CHAN
CHAN 005 RTL4
RTL4 006 ORF2
ORF2
SBS6 007 SBS6
(continued)
83