Philips DVDR7250H/05 User Manual page 81

Analogue Channel settings
Analogue Ch.
Setup
Auto search
Follow TV
Sort
Favourites
Auto search
Follow TV
Sort
Favourites
Favourites
1
2 NBC
3
4
5
6 MTV
7
System Menu Options
Although this recorder selects all the available analogue TV channels
during basic installation, you may want to repeat the process later if more
channels become available in your area or if you are reinstalling the
recorder.
A
Press SYSTEM on the remote control. Select { Setup } in the menu
and press repeatedly to select { Analogue Ch. }.
B
Press repeatedly to select the following settings in the menu and
press to enter its options.
Press OK on the remote control to start the automatic TV channel
search process and replace all previously stored analogue TV channels.
This process may take several minutes.
This feature is only available if you have connected this recorder to your
TV using the EXT1 TO TV-I/O scart socket. It allows you to change the
order of the TV channels (analogue only) stored in your recorder to
match the order on the TV.
1) Press OK to confi rm the message on the TV, 'TV 01' will appear on
the display panel. Use the TV's remote control to select
programme number {1} at your TV, then press OK on the recorder's
remote control.
– If the recorder fi nds the same TV channel as on the TV, it stores it
as 'P01'. 'TV 02' will then appear on the display panel.
– If no video signal is received from the TV, 'NO TV' will appear.
2) Use the TV's remote control to select programme number {2} at
your TV, then press OK on the recorder's remote control.
Repeat the above steps until you have assigned all the TV channels.
According to your preference, you can change the order of the stored TV
channels.
001 ARD 004
002 TELET 005
003 ORF2 ---
ORF2 006
004 TELET 007
1) Use keys to select the TV channel that you want to move and
press OK to confi rm.
2) Use keys to shift the TV channel to the desired position and
press OK to place the TV channel at the current position.
Press OK to mark your favourite TV channels for quick access by using
the channel up/down button on the remote control.
– The TV channels can be accessed using the
CHANNEL
– The TV channels can only be accessed by pressing
the corresponding number button on the remote
control.
TELET 004 CHAN
CHAN 005 RTL4
RTL4 ORF2 006 ORF2
SBS6 007 SBS6
+ −
on the remote control.
(continued)
81