Polygroup TP30M2W72C00 Manual

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
PACKAGE CONTENTS
Description
Part
1 Pot
2
Tree Body
3
Tree Top
*Electrical Rating For The Tree
(For Indoor and Outdoor Use)
120 V ~60Hz, 0.34A
Fig. A
Fig. B
MODEL #: TP30M2W72C00
1-888-919-0070
OR
Polygroup®!
Quantity
1
1
1
3
Assemble
Red Labels
Together
2
1
Insert
Green Label
Plug Into Wall
Outlet
1. Before you start to assemble your tree, choose an appropriate
location near a wall outlet.
2. Insert tree body 2 into the top hole of the pot. And then
insert the tree body 3 into tree body 2. See Fig.A.
3. Connect the plug into the wall outlet. Your entire tree
should now be lit. If some bulbs do not light or flickers,
search for any bulbs loose, missing or broken bulbs.
Replace bulbs promptly in order to maintain the
performance of your pre-lit tree.
STORAGE INSTRUCTIONS:
1. Remove all ornaments and decorations.
2. Unplug the cord from the wall and then unplug each section
of the tree.
3. Gently lift the tree top straight up to remove from the body
section and fold all branches towards the pole.
4. Repeat this step for the body section.
5. Carefully place all tree sections into a shipping box and tape
it shut.
6. Do not store tree in a damp area or in an area where the
temperature exceeds 100° F.
7. Keep out of reach of pets and children.
1