Table Of Contents - Yamaha 64263 Owner's Manual

This unit features a magnetically shielded design, but there is
still a chance that placing it too close to a TV set might impair
picture color. Should this happen, move this unit away from the
TV set.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. In this state, this unit is designed to
consume a very small quantity of power.
• VOLTAGE SELECTOR
(Asia and General models only)
The voltage selector switch on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
this unit into the AC main supply. Voltages are 110/120/
220/230-240 V AC, 50/60 Hz.
Taking care of the speaker
To maintain the spotless glossy surface of the polished finish,
wipe it with a soft, dry cloth. To avoid damage to the finish, do
not apply chemical solvents, such as alcohol, benzine, thinner,
insecticide, etc. Also, do not use a damp cloth, or any type of
cloth that contains chemical solvents, or place a plastic or
vinyl sheet on top of the speaker.
Otherwise, the finish may peel, the color may fade, or the
sheet may stick to the surface.
CONTENTS
GETTING STARTED ............................................. 1
Features ........................................................................ 1
About this manual ....................................................... 1
Supplied accessories................................................... 1
Controls and functions ................................................ 2
Preparing the remote control ...................................... 4
PLACEMENT ........................................................ 5
Subwoofer orientation ................................................. 5
CONNECTIONS .................................................... 6
1 Connecting to the amplifier equipped
with subwoofer (line out) terminal(s) .......................... 6
2 Connecting to an amplifier not equipped
with a subwoofer (line out) terminal.............................. 8
Connecting to the ground terminal........................... 11
Connecting the power cable...................................... 11
USING THIS UNIT ............................................... 12
Adjusting the sound balance .................................... 12
Storing the sound balance settings.......................... 13
Setting the sleep timer ............................................... 13
Operating the power of this unit using
the remote control of your amplifier......................... 14
Frequency response .................................................. 15
Advanced Yamaha
Active Servo Technology II................................ 16
TROUBLESHOOTING ........................................ 17
SPECIFICATIONS .............................................. 18
ii
En