Roland CAMM-1 PNC-1610 User Manual page 39

Instruction Format
Abort Instructions
ESC .J [ESC].J:
Abort Device Cotrol
Instruction
ESC .K [ESC].K:
Abort CAMM-GL III
Instruction
ESC .R [ESC].R:
Initialize Device
Control Instruction
Monitor Mode Instructions
ESC .Y ESC .(
CAMM-1 ON
ESC .Z ESC .)
CAMM-1 OFF
ESC .@
Set Monitor Mode
and Control DTR
ESC Q
Set Monitor Mode
Parameter Range
None
None
None
31
([ ] is default)
Aborts both the currently executed device control
instruction and output.
After executing only the current CAMM-GL III
instruction, clears the data buffer.
Initializes all settings established by the device
control instructions. However, each buffer size set
by the [ESC].T instruction is taken over.
Ignored.
Ignored.
Ignored.
Ignored.
Explanation