Download Print this page

Tru-Test XRS2 Stick Reader Setup Manual page 5

Transferring animal lifetime information to the stick reader

Hide thumbs Also See for XRS2 Stick Reader:

Enabling fields on the stick reader

Depending on the fields you have chosen to transfer, you may need to change the way that the stick reader is set up so

that fields are displayed during scanning.

By default, the stick reader will display both EID and VID fields, so if you have transferred EID/VID pairs to the

stick reader, this step is unnecessary.

To enable fields on the stick reader:

1. Press

to turn on the stick reader.

and select Settings.

2. Press

3. Select Animal Data.

4. Select the fields you want the stick reader to display during scanning.

For further information regarding your stock management system, contact Tru-Test Ltd on 1800 621 324 (AU) or 0800 878 837 (NZ)

For technical support, contact 1800 248 774 (AU) or 0800 AGDATA (0800 243 282) (NZ)

or Tru-Test Inc 800 874 8494 (US)

Issue 1 06/2018

Need help?

Do you have a question about the XRS2 Stick Reader and is the answer not in the manual?