Ceridian Dayforce Tuff Clock User Manual page 19

Page 19 of 31
DF Tuff
9.3 Note re Power Supply
Clocks are supplied with an external low current power pack which
delivers 24V DC and plugs directly into the 4-pin Power Input connector
on the rear of the unit . The pin
(Binder Part Number 09 3431 116 0415)
assignments are shown in Figure 5.
Figure 5: Power Input Pinouts
The provided power supply comes with a mating connector, which
when properly installed provides a measure of water-splash resistance.
The mating connector is a Binder Part Number 99 0430 14 04. Its wiring
guide is shown in Figure 6.
Figure 6: Power Input mating-connector pinouts