Download Print this page

ACR Electronics OLAS GUARDIAN Quick Start Manual page 11

Hide thumbs Also See for OLAS GUARDIAN:

Advertisement

4. OLAS MOBILE APPLICATION FEATURES (AVAILABLE FROM HOME SCREEN)
Customise the OLAS transmitters name (press the unique number associated with the transmitter -
e.g. OLAS-Float On 1670 - then type the custom name)
Check OLAS tag battery status
Enable/Disable cut-off switch for individual OLAS transmitters
Enable/Disable OLAS transmitters
Pause all tracking
5. PAUSE TRACKING
Press the control switch for 2 seconds, release the control switch after a single beep
When in Paused state the control switch will flash green for 3 seconds ON/3 seconds OFF
followed by a sound signal
Press the control switch once to re-start Tracking
If an OLAS transmitter has been removed or switched off the Guardian will remain in Pause
6. ADDING AN OLAS TRANSMITTER (WITHOUT THE OLAS APP)
Press the control switch for 2 seconds, release after a single beep, Tracking will be Paused
Switch on the OLAS transmitter and hold it within 1 meter of the Guardian
Press the control switch once, the control switch will flash green for 10 seconds whilst scanning for
new transmitters
The number of connected OLAS transmitters is indicated with a sound signal and green flash per
transmitter
7. ADDING AN OLAS TRANSMITTER (WITH THE OLAS APP)
Switch on the OLAS transmitter and hold it within 1 meter of the Guardian
Open the home screen and press the + icon in the bottom corner, press "Scan for new transmitter"
The control switch will flash green for 10 seconds whilst scanning for new transmitters
The number of connected OLAS transmitters is indicated with a sound signal and green flash per
transmitter
The home screen will update with the newly connected transmitters
8. REMOVE AN OLAS TRANSMITTER
Press the control switch for 4 seconds, release after the second beep – this will switch off the Guardian
Switch off the OLAS transmitter/s to be removed. OLAS transmitter are turned off by pressing the
button on the transmitter for 4 secs. The light on the transmitter will then flash red.
Hold all remaining OLAS transmitters within 1 meter of the Guardian
Press the control switch to switch the Guardian ON
The Guardian will scan for 30 seconds while the control switch LED flashes green to indicate scanning
After 30 seconds, any OLAS transmitter within 1 meter of the Guardian will be tracked
The number of connected OLAS transmitters is indicated with a sound signal and green flash per transmitter
The control switch will illuminate green to indicate the Guardian is Tracking
11

Advertisement

loading