Advertisement
OPERATION MANUAL
Index
1.
Start up or returning to the vessel
2.
Checking logged OLAS transmitters (without the OLAS mobile application)
3.
Checking logged OLAS transmitters (with the OLAS mobile application)
4.
OLAS mobile application features
5.
Pause Tracking
6.
Adding an OLAS transmitter (without the OLAS app)
7.
Adding an OLAS transmitter (with the OLAS App)
8.
Remove an OLAS transmitter
9.
Low battery alert
10.
Guardian override
11.
Switching off the Guardian
12.
Operating without OLAS transmitting devices
13.
Recommendations
1. START UP OR RETURNING TO THE VESSEL
•
Turn on all OLAS transmitters and place within 1 meter of the Guardian
•
Either switch on the power to the Guardian by activating the power supply or press the control
switch once
•
The control switch LED will illuminate Green with sound indication for 3 seconds
•
The Guardian will scan for 30 seconds while the control switch LED flashes Green
•
After 30 seconds, any OLAS transmitters within 1 meter of the Guardian will be logged
•
The number of connected OLAS transmitters is then indicated with a sound signal and green flash
per transmitter
•
The control switch will illuminate green to indicate the Guardian is tracking
2. CHECKING LOGGED OLAS TRANSMITTERS (WITHOUT THE OLAS MOBILE APP)
•
Press the control switch once
•
The number of logged OLAS transmitters is indicated with a sound signal and green flash per transmitter
3. CHECKING LOGGED OLAS TRANSMITTERS (WITH THE OLAS MOBILE APP)
•
Download and open the ACR OLAS application from Google Play or the App store
•
Select the Guardian from the device selection page
•
All OLAS transmitters that are being tracked will be indicated on the home page
10
Advertisement
