Change Settings; Picture - Philips HTS3531/93 User Manual

Control devices
Control the home theater and the other
connected HDMI-CEC compliant devices with a
single remote control.
One-touch play
If you enable One-touch play, the TV
automatically switches to the correct channel
when you play a disc in your home theater.
One-touch standby
When you press and hold
remote control, the home theater and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby mode.
If one-touch standby is enabled on your home
theater, you can switch to standby with the
remote control of the TV or other HDMI-CEC
devices.
EN
16
(Standby) on the
6

Change settings

This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already configured with
the best value for your home theater. Unless you
have a reason to change a setting, it is best to
leave it at the default value.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
To exit the menu, press

Picture

Change the picture settings to suit your
preferences.
Note
•
The best setting is automatically selected for the
TV. If you change the setting, make sure that the
TV supports the new settings.
Picture settings and format
1
Press - .
2
Select [Video Setup], and then press OK.
3
Change the following settings, and then press
OK:
•
[TV System]: For TV supported video
format.
• [TV Display]: For TV picture display
format.
•
[Picture Settings]: Predefined color
settings.
- .
- .