Create Mp3 Files; Easylink - Philips HTS3531/93 User Manual

Create MP3 files
Use your home theater to convert audio CDs into
MP3 files.
What you need
•
An audio disc.
•
A USB storage device
1
Connect a USB storage device to the home
theater.
2
Play your audio CD (CDDA/HDCD).
3
Press .
» A confirmation message is displayed.
4
Select [Yes], and then press OK.
» The create MP3 screen is displayed. The
right panel contains MP3 settings and the
left panel shows the audio tracks.
CREATE MP3
OPTIONS
Speed Normal
Bitrate 128kbps
CRT ID3 Yes
Device USB1
SUMMARY
Select Track 0
Time 00:00
Start Exit
5
Press the Navigation buttons and OK to
select and change:
•
[Speed]: Select the write-to-file speed.
• [Bitrate]: Select the conversion quality.
• [Device]: Select the USB storage device
which you use to store the MP3 files.
6
Navigate to the right panel, and then select
the audio tracks and press OK.
•
To select all tracks, navigate to [Select
All], and then press OK.
7
Select [Start], and then press OK to start the
MP3 conversion.
» A new folder which contains the MP3
files is created in the USB storage device.
• To exit the menu, select [Exit], and then
press OK.
TRACK
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Select All
Deselect All
Note
•
When the conversion is in process, do not press
any buttons.
•
DTS CDs and copy-protected CDs cannot be
converted.
•
Write-protected or password-protected USB
storage device cannot be used to store MP3
files.

EasyLink

The home theater supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
What you need
•
HDMI-CEC compliant devices.
•
An HDMI connection between the
connected devices.
Switch on
1
On the TV and other connected devices, turn
on the HDMI-CEC operations. For details,
see the manual of the TV or other devices.
2
Press - .
3
Select [General Setup], and then press OK.
4
Select [EasyLink Setup] > [EasyLink], and
then press OK.
5
Select [On], and then press OK.
EN
15