Network Configuration - Bodet HARMONYS LINE Installation And User Manual

3.2 Network configuration
This page can be used to configure the device on the network as follows:
- MAC address: this is the MAC address of the device. This address is unique to each product. This number is
indicated on a label on the rear of Bodet devices.
- Name: product name + MAC address (by default). It is advisable to include the position of the device in the name of
the product. Example: Line_Home
- Box to tick DHCP: enables automatic definition of the IP settings of the product on the network (where a DHCP server
is present on the network).
If this is not ticked, the following settings are modifiable:
- IP Address: allows manual definition of the product's IP address.
- Mask: the subnet mask can be used to associate a device with the local network.
- Gateway: the gateway can be used to connect the device to two computer networks.
- DNS address: address which can be used to associate a product name with an IP address. This eliminates the need
to enter an IP address into the browser, as it can be replaced with a number or name defined by the
user, Example: www.bodet.com being easier to remember than 172.17.10.88.
The OK and Restart button can be used to save data changes in the device concerned, and then restart it.
6
EN