General Points; Introduction; Operating Principle - Bodet HARMONYS LINE Installation And User Manual

1. GENERAL POINTS

Thank you for choosing the Bodet HARMONYS LINE. This product has been carefully designed to meet your needs
in accordance with ISO9001 quality standards.
We recommend that you read this manual carefully before using the product for the first time.
Retain this manual throughout the lifespan of your product so that you can refer to it when necessary.
Failure to follow these instructions may cause irreversible damage and invalidate the warranty.
Non-contractual data. BODET reserves the right to make certain changes to its devices, regarding functional,
technical, aesthetic or colour characteristics, without prior notice.
This manual is subject to change without notice. To obtain the most recent version of this document, please refer to
our website: www.bodet-time.com.

1.1 Introduction

The Harmonys Line is connected to a magnetic induction loop amplifier in order to:
- Transmit ring tones/melodies from the product's internal storage area. Controlled by the Sigma master clock
(via the Ethernet network) or from a manual command sent by the IP buttons case (e.g. Lockdown alert).
- Transmit calls from the Harmonys microphone.
- Transmit audio streaming by redirecting the computer's sound to the Harmonys sounder(s).
Indoor installation, close to a magnetic induction loop device.
The product's settings can be adjusted from the onboard web server.

1.2 Operating principle

ALERTE ALERTE
CONFINAGE EVACUATION
1 2 3 4
STOP FIN ALERTE
BUTTON CASE
WALL
HARMONYS
Professionnal line level- Stereo on 2 RCA jacks
4
BODET AUDIO TRANSMISSION SYSTEM
ANTENNA
CEILING
HARMONYS
HARMONYS LINE
(ref.: 907 740)
magnetiC induction
LOOP
magnetiC INDUCTION
HARMONYS HARMONYS
LOOP AMPLIFIER
LINE LINE
MAGNETIC LOOP TRANSMISSION SYSTEM
(noT INCLUDED)
EN