Parental Control; Energy Saving - Philips HTS3531/55 User Manual

Parental control

Restrict access to discs.
Password
You can set or change your password to play a
restricted disc.
1
SETUP.
Press
2
Select [Preference Setup], and then press OK.
3
Select [Password], and then press OK.
» A change password menu is displayed.
4
Follow the instructions on the TV to set or
change password.
•
If you do not have a password or you
have forgotten, enter 0000.
5
Press OK.
Ratings
Some discs are recorded with ratings according to
age. You can set up your home theater to play only
discs with an age rating lower than your child's age.
1
SETUP.
Press
2
Select [Preference Setup], and then press OK.
3
Select [Parental], and then press OK.
» A message prompts you to enter the
password.
4
Enter the password with the Numeric buttons.
5
Select an age rating, and then press OK.
•
To play all discs irrespective of the rating,
select level 8.
Lock disc
To restrict access to discs that are not encoded
with ratings and parental control, lock the disc
manually. You can lock upto 20 discs on your
home theater.
1
While playing a disc, press
2
Select [General Setup], and then press OK.
3
Select [Disc Lock] > [Lock], and then press
OK.
» A message prompts you to enter the
password.
4
Enter the password with the Numeric buttons.
» The disc is locked.
•
To play the locked disc, enter the
password.
SETUP.

Energy saving

Save energy by changing the following settings.
Auto standby
When playing a disc or a USB storage device,
automatically switch your home theater to standby
if:
•
it is in pause or stop mode, and
•
no button is pressed for 30 minutes.
1
SETUP.
Press
2
Select [General Setup], and then press OK.
3
Select [Auto Standby] > [On], and then
press OK.
Sleep timer
Set timers to switch the home theater to standby
after a specified time.
1
Press SETUP.
2
Select [General Setup], and then press OK.
3
Select [Sleep Timer], and then press OK.
4
Select the duration of the sleep timer.
» The sleep timer can be set up to 60
minutes. If the sleep timer is set to [Off],
it switches off.
5
Press OK to activate.
» The home theater switches to standby
after the specified time.
Screen saver
Automatically switch your home theater to screen
saver mode if:
•
it is in pause or stop mode, and
•
no button is pressed for 10 minutes.
1
SETUP.
Press
2
Select [General Setup], and then press OK.
3
Select [Screen Saver] > [On], and then press
OK.
EN
17