5
Change settings
The home theater settings are already confi gured
for optimal performance. Unless you have a reason
to change a setting, we recommend that you keep
the default setting.
Note
•
You cannot change a setting that is grayed out.
•
To return to the previous menu, press
BACK . To exit the menu, press
Language settings
Onscreen display language
1
SETUP .
Press
2
Select [General Setup] and then press OK .
•
[OSD Language] : Select a display
language for menu.
Disc language
1
SETUP .
Press
2
Select [Preference Setup] and then press OK .
•
[Audio] : Select an audio language for discs.
•
[Subtitle] : Select a subtitle language for discs.
•
[Disc Menu] : Select a menu language for
discs.
Note
•
If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digit language code found at the end of this
user manual .
•
If you select a language that is not available on a
disc, the home theater uses the default language
of the disc.
EN
16
SETUP .
Picture and video settings
1
SETUP .
Press
2
Select [Video Setup] and then press OK .
•
[TV System] : Select a video format
supported by the TV.
•
[TV Display] : Select a picture format to
fi t the TV screen.
•
[HDMI Setup] : [Wide Screen Format] :
For 16:9 wide screen TV display setting.
[HDMI Video] : Select the resolution of
the video signal being output from the
HDMI OUT.
•
[Picture Settings] : Select color settings
for the video display on TV.
•
[HD JPEG] : Enable or disable high
defi nition picture display.
Note
•
If you change a setting, make sure that the TV
supports the new setting.
Audio settings
1
SETUP .
Press
2
Select [Audio Setup] and then press OK .
•
[HDMI Audio] : HDMI audio is
automatically down-mixed to two
channel for TV speakers. If you do not
want to output audio through your TV,
disable the HDMI audio.
•
[Night Mode] : Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and increases
volume of sounds such as speech.
Applicable to Dolby Digital encoded
DVD discs only.