Set Up Speakers; Set Up Easylink (Hdmi-Cec Control) - Philips HTS5533/55 User Manual

Option 2: Connect audio through a digital
coaxial cable
Good quality audio
1
Using a coaxial cable, connect the COAXIAL
connector on your home theater to the
COAXIAL/DIGITAL OUT connector on the
TV or other device.
•
The digital coaxial connector might be
labeled DIGITAL AUDIO OUT .
Option 3: Connect audio through analog
audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on the TV or other
device.

Set up speakers

Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in the
quick start guide, and then switch the TV to the
correct source for your home theater.
1
Press
remote control.
2
Select [Audio Setup] and then press OK .
3
Press the Navigation buttons and OK to
select and change:
•
•
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
VCR
•
Depending on the manufacturer, HDMI-CEC is
known by many names. For information on your
device, see the user manual of the device.
•
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
Before you start
•
Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
•
Make the necessary connections described in
the quick start guide, and then switch the TV
to the correct source for your home theater.
SETUP on your home theater
[Speakers Volume] : Set the volume level
of each speaker.
[Speakers Delay] : Set the delay time for
speakers which are placed closer to the
seating position in order to obtain equal
audio transmission from all the speakers.
Note
EN 9