Programming A Recording With The Video Plus System - Philips LX7500R/05 User Manual

Timer recording
Programming a recording with
the VIDEO Plus
You do not need to tediously enter the date, the
programme number, the start and end time. All information
needed for programming is contained in the VIDEO Plus
programming number.You can find this number in most of
the TV magazines, indicated next to the start time of the
TV programme.
1
Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2
Press and hold DVD/MON for 1 second.
3
Press TIMER.
Press 4 or 3 as often as necessary to select the line
4
VIDEO Plus+ system.
Press 2 to confirm the selection.
5
6
Use the numerical buttons to enter the VIDEO Plus
programming number.This number is up to 9 digits long, e.g.
for 5-312-4 or 5 312 4 enter 53124.
To clear, in case you made a mistake, press CLEAR.
0 0
Timer
VIDEO Plus+ system
Date Prog. Start PDC End
19 PHI 8:00
Mo-Fr/Weekly
Press RETURN
If you wish your recording to be repeated, press RETURN
0 0
as often as necessary to select the desired option:
Mo-Fr: for recordings to be repeated daily from Monday
to Friday
Weekly: for recordings to be repeated weekly (every
week on the same day)
7
Press OK to confirm.
The timer programme appears.
34
®
system
®
®
VPS Rec
Mode
9:00 M2
To store
Press OK
Notes:
If PlusCode number wrong is displayed, the keyed in
®
VIDEO Plus+ programming number is incorrect. Check time
and date on the DVD recorder system. Repeat your entry
correctly or end programming by pressing SYSTEM MENU.
If Please enter programme number is displayed, the
programme number of the TV channel has not yet been
allocated to the VIDEO Plus+
the appropriate programme number of the TV channel using 1,
2 or the numerical keys on the remote control and confirm by
pressing OK.
If daily recording was entered for a wrong day, Weekend
programming not possible is displayed. Make sure to
enter a day from Monday to Friday.
To change the timer programme, you can go back at any
0 0
time. Use 1 or 2 to select the appropriate input field. Use
4 or 3, or the numerical buttons to change the
information.
To switch on VPS/PDC press 2 to select Start. Press
0 0
RETURN as often as necessary until 8 lights up.
VPS/PDC is switched on.
®
Note: The VIDEO Plus system does not take the later
starting of a TV programme into account.To compensate for a
later starting time, switch on VPS/PDC.
To change the recording mode press 2 to select End.
0 0
Press RETURN as often as necessary to select the desired
recording mode.
8
Press OK again to store the entire programming
information.
The entire programming information is stored.
To exit the timer without storing press TIMER repeatedly.
0 0
9
Press TIMER to end.
10
Load a disc on which you want to record in the tray.
11
On a DVD+RW select an empty title at the end of
the disc. Otherwise previous recordings may be
overwritten.
12
A timer recording will only start if you have switched
the DVD recorder system to standby or if you have
selected TUNER, CD, CDR or TAPE: Press 2 or
TUNER, CD, CDR or TAPE.
If any recordings are programmed,
To stop a running timer recording before the scheduled
0 0
end, press 9 on the DVD recorder system.
®
programming number. Select
lights up.
TIMER