Advertisement
AlphaBot2-Pi Assembly Diagram
2.Camera Pan & Tilt Assembly
Place the steering gear in the middle of the stands
(f)
and
(g)
and fix
it with the screw (7). Please make sure the rotor on the steering gear
is installed in a correct direction.
Cut out a little bit of the arm on the rocket arm (c), place it into the
stand (g), and fix it with the screw
(5)
Then, cut out a bit of each arm
on the cross-shape rocket arm, and place it into the base, and fix it
with the screw
(5)
on the back side of the base.
Advertisement
