Setting The Tv Display - Philips HTS3548/51 User Manual

If the language you want is not
available in the list, select { Others
Use the numeric keypad (0-9) on the
remote control to enter the 4-digit
language code 'XXXX' (see page 4) and
press OK to confi rm.
E
C D
Repeat steps ~
Helpful Hints:
– During DVD playback, you can switch the
audio and subtitle languages by pressing the
AUDIO and SUBTITLE buttons on the
remote control. However, this does not
change the default settings you have made
here.
– For some DVDs, the subtitle/audio/menu
language can only be changed via the DVD
disc menu.
Getting Started
}.
for other settings.

Setting the TV Display

Set the aspect ratio of this unit according
to the TV type you have connected. The
format you select must be available on
the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
A
In disc mode, press SETUP on the
remote control.
B
Press repeatedly to select { Video
Setup Page }.
C
Press to highlight { TV Display } in
the menu and press
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
HDMI Setup
{ 4:3 Pan Scan }
Select this if you have a
conventional TV and
want both sides of the
picture to be trimmed or formatted
to fi t your TV.
{ 4:3 Letter Box }
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV will be displayed.
{ 16:9 Wide Screen }
Select this if you have a
wide-screen TV.
D
Select one of the options and press OK
to confi rm.
(continued)
.
4:3 Pan Scan
4:3 Letter Box
16:9 Wide Screen
21