Step 4: Setting The Tv Display - Philips HTS6500 User Manual

O
Getting Started (continued)
If the language you want is not
available in the list, select { Others. }
Use the numeric keypad (0-9) on the
remote control to enter the 4-digit
language code 'XXXX' (see last page) and
press OK to confirm.
Repeat steps O _ O for other settings.
Helpful Hints:
- During DVD playback, you can switch the
audio and subtitle languages by pressing the
AUDIO and SUBTITLE buttons on the
remote control. However, this does not
change the default settings you have made
here.
- For some DVDs, the subtitle/audio/menu
language can only be changed via the DVD
disc menu.
Step 4: Setting theTV
display
Set the aspect ratio of the DVD system
according to the TV type you have
connected. The format you select must
be available on the disc. If it is not, the
setting for TV display will not affect the
picture during playback.
In 'DISC' mode, press SETUP on the
remote control
Press l_ repeatedly to select { Video
Setup
Page. }
Press V to highlight { TV Display, }
then press I_.
Video Setup Page
{ 4:3 Pan Scan }
Select this if you have a : @ i;
conventional TV and
want both sides of the I i
picture to be trimmed or formatted
to fit your TV.
{ 4:3 Letter Box }
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV will be displayed.
{ 16:9 Wide Screen } @
Select this if you have a
wide-screen TV.
Select one of the options and press OK
to confirm.
23