Setting The Speakers' Channels - Philips HTS3566D/37B User Manual

Getting Started
Setting the speakers'
channels
You can adjust the delay times (center
and surround only) and volume level for
individual speakers. These adjustments let
you optimize the sound according to
your surroundings and setup.
Before you start...
Stop the disc playback by pressing Ç
twice or remove the disc from the disc
tray. Otherwise, the settings are not
accessible.
A
In disc mode, press OPTIONS on the
remote control.
B
Press repeatedly to select { Audio
Setup } icon, then press
C
Select { Speakers Volume } and press
.
Audio Setup
Speakers olume V
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync
Press OPTIONS to exit menu
D
Use keys to set the volume level for
each speaker (-6dB ~ +6dB) and press
OK to confi rm.
24
1_hts3565-66D_37_eng2_final813.i24 24 1_hts3565-66D_37_eng2_final813.i24 24
(continued)
.
Speakers Level Setup
Front Left
0dB
Front Right
0dB
Center
0dB
Subwoofer 0dB
Rear Left
0dB
Rear Right
0dB
E
Use keys to highlight { Speakers
Delay } and press
Audio Setup
Speakers olume V
Speakers Delay
HDMI Audio
CD Upsampling
Speakers Distance Setup
Audio Sync
Press OPTIONS to exit menu
F
Use keys to set the delay times
(0 ms ~ 15 ms) for centre and rear
speakers that best suit your surround
sound needs.
G
Press OK to confi rm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be generated to help you
judge the sound level of each speaker.
.
Center 0ms
Rear Left
0ms
Rear Right
0ms
2008-03-27 3:12:01 PM 2008-03-27 3:12:01 PM