REBOTEC / BA-No.: 02.05.124/2016-12 Product Description Table of contents General advisories Introduction Intended proper use Equipment advisories Warranty Spare parts orders, complaints Re-use, lifetime Disposal Symbol advisory Safety advisories for use Scope of delivery Spare parts, accessories Setting up for use 10.1...
(SN) and operation, maintenance and care of the walker the product’s year of manufacture. You can find Fixi-YANO and Fox-YANO with forearm support. this information on the nameplate of the walker. 1.2 Intended proper use 4.
REBOTEC / BA-No.: 02.05.124/2016-12 10. Setting up for use 10.3 Attach forearm support Release the nuts (A, B) at the T-connector (X) / The product is delivered pre-assembled in the box. handle-bar the nuts and pull the screws (C, D) all the way out.
REBOTEC / BA-No.: 02.05.124/2016-12 11. Using the walker Before use, it must be assured that the walker or is in a proper condition for safe use. If defects or malfunctions are detected, then the walker must not be used. In this case the defect or malfunction must be removed by a qualified serviceman.
REBOTEC / BA-No.: 02.05.124/2016-12 11.4 Folding the walker 12. Troubleshooting Unfolding Possible Fault Correction Place the walker down on its wheels and press the cause frame downwards. The folding lock mechanism Wheels turn Clean, inspect Gummed up (locking pins) must click fully into position.
You can order the User instructions or see via In such cases REBOTEC overtakes no liability! our website at www.rebotec.de. It is possible to print out the information and to read it as Follow all the instructions when ordering spare needed.
Need help?
Do you have a question about the Fixi-YANO and is the answer not in the manual?
Questions and answers