Audio Setup - Philips HTS3566D/78 Quick Start Manual

Audio Setup

(underlined options are the factory default settings)
Speakers Volume
Speakers Delay
HDMI Audio
Setup Menu Options
Access the speaker's level setup menu. Use
the volume level for each connected speaker between -6dB to
+6dB. See 'Getting Started - Setting the speakers' channels' for
details.
Access the speaker's distance setup menu. Use
the delay times for the center and rear speakers based on the
listening position and distance. See 'Getting Started - Setting the
speakers' channels' for details.
Note: 1 ms increase/decrease of delay time is equivalent to one
(1) foot change in distance. Use the longer delay time settings
when the rear speakers are closer to the listener than the front
speakers.
This setting is only required if you are using the HDMI OUT
socket to connect your TV or other display device (see 'Option 4:
Connecting to a HDMI-compatible TV').
{ Off } – Turn off the HDMI audio output. You can still
enjoy the sound output through the speaker
system.
{ All } – The HDMI audio output will be same as the
audio stream being played back. In the case
when the playback audio format is not
supported, the audio output will be changed
to PCM (Pulse Code Modulation)
automatically.
Notes:
– It may take a while for this unit and the input device to
communicate and initialize.
– It is not possible to listen to SACDs or copy-controlled
DVD-Audio CPPM (Content Protection for Playable Media)
sources using the HDMI connection.
(continued)
keys to adjust
keys to set
39