Step 4: Connecting The Fm Antenna; Step 5: Connecting The Power Cord - Philips HTS3566D/78 Quick Start Manual

Main Unit
(rear)
AUX 1
Step 4: Connecting the
FM antenna
A
Connect the supplied FM antenna to the
FM 75 socket. (For some models, the
Ω
FM antenna has been connected in the
factory.) Extend the FM antenna and fi x
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Basic Connections
Step 5: Connecting the
Notes:
– For power supply rating, refer to the
rear or bottom of the main unit.
– Turning off to standby mode does not
disconnect the unit from mains.
A
When all the connections are complete,
set the voltage selector to the local
power line voltage.
B
Connect the AC power cord to the
power outlet.
The standby LED on the main unit
lights up.
Helpful Hint:
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
(continued)
Main Unit
power cord
(rear)
17