Table of Contents
Advertisement
[EasyLink Setup]
If this Home Theater System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select
[Off] .
[One
When you press PLAY , the
Touch
TV and Home Theater System
Play]
are turned on. Disc play starts
if there is a disc in the Home
Theater System.
To disable this feature, select
[Off] .
[One
If you press and hold STANDBY
Touch
for at least 3 seconds, the Home
Standby]
Theatre System and all the HDMI
CEC devices switch to standby
simultaneously.
To disable this feature, select
[Off] .
[System
When you play audio that is
Audio
routed from the connected
Control]
devices, this Home Theater
System switches to the
corresponding audio source
automatically.
To enable this feature, select
[On] . Then proceed to [Audio
Input Mapping] to scan and map
all the connected devices.
[Audio
When you map the audio
Input
input correctly, this Home
Mapping]
Theater System switches to the
audio from the played device
automatically.
Note
•
You must turn on the HDMI CEC operations on
the TV/devices before you can enjoy the EasyLink
controls. See the TV/devices manual for details.
•
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
[Disc Lock]
Sets play restriction for a speciÀ c discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
•
[Lock] – Restricts access to the current
disc. Once activated, a password is
needed to unlock and play the disc.
•
[Unlock] – Plays all discs.
Tip
•
You can set or change the password (see 'Adjust
settings' > 'Preferences' > [Password] ).
[Display Dim]
Changes the brightness level of the display
panel on this Home Theater System.
•
[100%] – Normal brightness.
•
[70%] – Medium brightness.
•
[40%] – Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
•
[On] – Sets the screen saver to appear
after 5 minutes of inactivity (for example,
in pause or stop mode).
•
[Off] – Disable screen saver mode.
[Sleep Timer]
Switches to standby automatically after the
preset time.
•
[15 mins] , [30 mins] , [45 mins] , [60 mins]
– Selects the count down time before
the Home Theater System switches to
standby.
•
[Off] – Disables sleep timer mode.
EN
37
Hide quick links:
Advertisement
Table of Contents
