Connect; Place The Home Theater System - Philips HTS3377/05 User Manual

3 Connect

Make the following connections to use your
Home Theater System.
Basic connections:
• Video
• Speakers and subwoofer
• Wireless receiver (for HTS3377W only)
• Power
Optional connections:
• Radio antenna
• Audio
• Audio from TV
• Audio from cable box/recorder/
game console
• Other devices
• Portable media player
• USB device
Note
•
Refer to the type plate at the back or bottom of the
product for identiÀ cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.
Place the Home Theater
System
• Place the Home Theater System where it
cannot be pushed, pulled over or knocked
down. Do not place it in an enclosed
cabinet.
• Be sure that you have full access to the
power cord for easy disconnection of the
Home Theater System from the power
supply.
Wireless receiver is for HTS3377W only.
Different set of speakers for HTS3270. (see
'SpeciÀ cations' > 'Speakers').
1
Place this Home Theater System near the
TV.
2
Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3
Place the subwoofer at the corner of the
room or at least three feet away from the
TV.
4
Place the wireless receiver (for
HTS3377W only) near the AC outlet and
in between the rear speakers. Position
the wireless receiver (with Philips logo)
directly parallel to the Home Theater
System.
Tip
•
To avoid magnetic interference or unwanted noise,
never place this Home Theater System too close to
any radiation devices.
EN 11