Table of Contents
Advertisement
Map the audio inputs to the
connected devices
Note
•
Before you start, ensure that the audio output of
the HDMI TV and other HDMI devices have been
connected to the audio input jacks on this Home
Theater System.
General Setup
1
Press DISC .
2
Press
SETUP .
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press
•
[One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
»
Once complete, audio input mapping
menu is displayed.
Audio Input Mapping
For example, if the TV audio is
connected to the AUX jack on this
Home Theater System, select [Aux]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theater System that is used to connect
to other HDMI device (e.g. AUX, SCART
IN), then press .
7
Select the correct connected device, then
press OK .
»
Repeat steps 5–7 to map other
connected devices.
8
Press
SETUP to exit the menu.
EN
23
Hide quick links:
Advertisement
Table of Contents
