Warning Symbols; Electrical Safety - Black & Decker BEMW471ES Original Instructions Manual

Table of Contents


If operating the mower in a damp
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
Never pick up or carry an appliance
while the motor is running.

Warning symbols

The following warning symbols are found
on the appliance along with the date
Warning! Read the manual prior
to operation.
Do not expose the appliance to
rain or high humidity.
Always remove the plug from
the socket before inspecting
a damaged cable. Be careful
not to use your appliance if the
cable is damaged.
Beware of sharp blades.
Beware of flying objects. Keep
bystanders away from the
cutting area.
Keep the cable away from the
cutting blades.
The blades will continue to
rotate after the machine is
switched off.
(Original instructions)
Directive 2000/14/EC
guaranteed sound power

Electrical safety

Warning! This tool is double
insulated; therefore no earth
wire is required. Always
check that the power supply
corresponds to the voltage on
the rating plate.
If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Electric safety can be further improved
by using a high sensitivity 30 mA
Residual Current Device (RCD).
This appliance includes some or all of the following features.
1. Power button
2. Comfort grip handles
3. On/off switches
4. EasySteer pivot control
5. EasySteer pivot control buttons
6. Upper handle
7. Handle knobs
8. Cable management system (BEMW471ES, BEMW481ES
units only)
9. Lower handle
10. Back flap
11. Carrying handles
12. Height adjustment gauge
13. Height adjustment lever
14. Grass box
14. Grass box handle
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.

Hide quick links:


Table of Contents

This manual is also suitable for:


Table of Contents