Table of Contents
Advertisement
Cleaning:
The surface of the air shelter should be cleaned with a solution of mild
soap and fresh water after each use. To avoid abrasion and wear, be sure
that all the sand, small rocks, oil and dirt have been flushed away from
the air shelter surfaces, and particularly the inside floor next to the berms.
** WARNING: NEVER USE PETROL OR SOLVENT
FOR CLEANING
MAINTENANCE:
Clean your unit with just fresh water and normal soap.
To get your air berms looking 'like new' apply wax for artificial
leather/or use Armor All type products and apply to the unit with a dry,
clean cloth.
When you store the unit for a long time without use, we would
recommend you inflate it monthly and check if it all is as originally left.
Use the enclosed repair kit for small punctures. Clean the fabric around
the area to be
before. Apply a coat of glue to the
material, allowing it to dry for 2 - 3 minutes. It is strongly
recommended that all patch work be allowed to cure at least 24 hours
before re-inflating the unit.
It is recommended that the air shelter be returned to PRO-SAFE or an
authorized PRO-SAFE dealer for all large repairs.
TROUBLESHOOTING / REPAIRS
Your shelter should provide a long and trouble free operational life span.
It has been designed such that no spares need be kept other than
consumable items and accessories you may elect to purchase. However,
under certain circumstances the potential exists for faults to occur; and
their identification and possible rectification are as listed below:
repaired using MEK or acetone, then re-clean as
damaged part and to the patch
15
Advertisement
Table of Contents
